Sony OXF-R3 - Manual (Page 180)

6-18
Chapter 6 Technical Descriptions
Chapter 6 Technical Descriptions
6-2 Channels Section Panels
Note:
Note:
3 LINE Push-Button
Selects the digital or analogue LINE input as assigned on the LINE Inputs
GUI.
4 Ø Push-Button
Reverses phase of the selected input source.
5 GAIN Knob
Allows gain adjustment for the selected source.
6 8 Character Display
Indicates the gain for the current source in dBs.
The gain and phase settings may be different for all three inputs simultaneously.
Channel Path Selectors
The channel signal passes through each selector block from top left to right
and then from bottom left to right. Each selector block may have a single
process element such as EQ, Insert or Dynamics from the pool available.
The sequence of processing may be set up in any order and easily changed
according to the task in hand.
7 +/- Push-Buttons
Select the processor function into position in the signal chain but this will
not be inserted and operational until the IN button is selected. Step
through them until the one required is displayed. Press +/- together to
clear display.
8 8 Character Display
Indicates processor selection.
9 IN Push-Button
Puts the process displayed into operation.
Any processes in use may only be re-ordered or de-selected whilst their IN buttons
are not lit i.e. whilst the process is out of the signal path.
Currently available processes and functions: FILTERS, EQ, DYNAMICS,
MULTITRACK, INSERT, DELAY and FADER. The FADER is
automatically placed at the end of the bottom right block, at the channel
output, unless it is selected in one of the blocks. It need be selected only
if, for example, Dynamics is required post fader.
B EQUALISER & FILTERS SECTION
Equaliser and Filter parameters can be displayed on Channel Screens.