Sony OXF-R3 - Manual (Page 343)

Chapter 7 Session Management
7-83
Chapter 7 Session Management
Note
Global Ready Enable does not apply to the Centre Section
items in the lower part of the selector.
Using Keyboard Entry
Keyboard entry allows ‘ready enable’ in Abs or Trim
for the whole console or specific channels entered
using the QWERTY Keyboard. Controls will be
enabled according to the CHANNEL Selector
described previously.
To Ready Enable the Whole Console
At the QWERTY Keyboard type:
READY {ENTER}
A confirmation pop-up will appear. Clicking on OK,
which is highlighted red, or pressing {ENTER} will set
the complete console to ‘ready absolute’ status.
Clicking on NO gives rise to a further confirmation
pop-up to set the complete console to ‘ready trim’
status. Click on OK or press {ENTER}. NO will cancel
the operation.
To Ready Enable Channels & Control Groups
Keyboard entry has an additional function allowing
Control Group Faders to be specified as well as
Channels.
At the QWERTY Keyboard type:
READY Specify Channels as Below {ENTER}
• Channels and Control Group Faders:
Ranges are specified with ‘..’ as a separator:
1..72
= Channels 1-72
01..032 = Control Group Faders 1-32
• Individual items are separated by ‘.’
2 . 4 . 25 = Channels 2, 4, and 25
• Unlimited strings are possible in the same entry:
e.g. 01 . 03 . 05 .. 08 . 1 .. 24 . 48 .. 56 . 65 =
Control Group Faders 1, 3, and 5-8
Channels 1-24, 48-56 and 65