Sony OXF-R3 - Manual (Page 352)

7-92
Chapter 7 Session Management
Chapter 7 Session Management
7-9 MIDI
CHANNEL (Second field)
Click on for a pop-up to select the MIDI Channel from
1-16.
COMMAND (Third field)
Click on for a pop-up to select the MIDI Command
type.
PARAMETER (Fourth field)
Displays a ‘first’ Parameter depending on which
COMMAND type has been selected. Click on for a
pop-up to select a new Parameter. Click on a suitable
entry in the pop-up or click on NEW ENTRY to type
in a value using the QWERTY Keyboard. Then click
on OK or press {ENTER} .
Every time the switch is pressed the MIDI values
displayed will be transmitted provided Enabled is set
in the sixth field.
PARAMETER (Fifth field)
Displays a ‘second’ Parameter depending on which
COMMAND type has been selected. Click on for a
pop-up to select a new Parameter. Click on a suitable
entry in the pop-up or click on NEW ENTRY to type
in a value using the QWERTY Keyboard. Then click
on OK or press {ENTER} .
Every time the switch is pressed the MIDI values
displayed will be transmitted provided Enabled is set
in the sixth field.
ENABLED [DISABLED] (Sixth field - left)
Click on to Enable or Disable MIDI control from the
associated switch.
LATCH [MOMENTARY] (Sixth field - right)
The default operation of the switches is a Momentary
action when MIDI data is transmitted as the switch is
pressed. Selecting Latch will cause NOTE ON to be
transmitted on the downward push. The button will
stay lit when released. When pressed again and
released, NOTE OFF will be transmitted on the
upward release action.
SCRIBBLE
Click on for a pop-up to enter an appropriate electronic
scribble name which will appear on the display to the
side of the associated switch. Either click on a name
in the list or click on NEW ENTRY and then use the
QWERTY keyboard to type in a new name of up to 6
characters. Then click on OK or press {ENTER} .