Sony OXF-R3 - Manual (Page 366)

7-106
Chapter 7 Session Management
Chapter 7 Session Management
7-11 Preferences
Setting up a NETWORK DRIVE
Each networked drive requires a suitable name along with the name of the
host computer relating to the network itself.
1
Click on NEW ENTRY for a pop-up to enter a suitably familiar name
relating to the remote system. Type it in using the QWERTY
Keyboard and then click on OK or {ENTER}.
2
Move the orange highlight in the same row to the REMOTE FILE
SYSTEM column. Click on it or press {EDIT} on the Control Keyboard
for a pop-up. Enter the host name and file path, which normally ends
‘/sm’ for the remote host computer.
NETWORK ADMINISTRATION screen
NETWORK Tab
The NETWORK function allows other R3 systems, which are on the same
‘computer network’, to be assigned as remote drives that can be accessed
via the Backups GUI. This allows data in the form of Projects and/or
associated lower level data, such as Titles, Mixes and Snapshots, to be
copied from an external system.