Sony OXF-R3 User Manual
Page 215
Chapter 6
Technical Descriptions
6-53
Chapter 6 Technical Descriptions
3 T/B GRP 1 & T/B GRP 2 Push-Buttons
Allow combinations of T/B outputs to be switched on simultaneously. A
group is set up by pressing and holding one of the T/B GROUP buttons
and momentarily pushing other T/B buttons required in that group. The
T/B GROUP button is then released. Any T/B button, such as Foldback or
SLS, may be selected as part of a group. Any T/B button which belongs to
a group retains its individual functionality. T/B GROUPS have latching
and momentary actions and may optionally dim CR monitor LS.
4 8 Character Displays
Display T/B Group names as designated via the SCRIBBLES GUI
accessed via the MASTER GUI.
5 LISTEN 1 Push-Button
Send the listen Mic signal to CR monitors with either a momentary or
latching action. The Listen signal replaces the normal monitor signal.
6 LOCK Push-Button
Locks out SOLO-IN-PLACE, which is replaced with AFL. The Oscillator
is locked out, as is the Slate function.
7 REHEARSE Push-Button
Latches a relay closure for the Rehearse signal. A further press unlatches
it.
8 RED LIGHT Push-Button
Latches a relay closure for RED LIGHT signal. A further press unlatches
it.
9 CUE Push-Button
Enables a momentary relay closure to send a CUE signal.
!º SLATE Push-Button
Sends talkback to all normal destinations and, additionally, to the channel
Group outputs.