Sony OXF-R3 - Manual (Page 207)

Chapter 6 Technical Descriptions
6-45
Chapter 6 Technical Descriptions
Selecting {MAIN} ensures that the Main Output Bus sources are fixed to the
meters irrespective of what is selected to the CR Monitor LS:
• Stereo Main Output
- Indicate the L and R signals from the Main Output Bus or L and R from the
Fold-Down Matrix. This option is set in the PREFERENCES GUI described
in section 5-2-5.
- Right set of 8 Meters indicate output level for SSGs 1-16 and Sends 1-24
according to the meter selector described later in this section.
• Surround Main Output
- Central Stereo Meter indicates output level for the Stereo Output from the
Fold-Down Matrix which is derived from the Surround signal.
- Right set of 8 Meters indicate output levels for the Main Output Bus.
2 FOLLOW MONITOR Push-Button
Depends on whether the Main Output Bus is set for Stereo or Surround.
Selecting {FOLLOW MONITOR} allows the central meters to follow all monitor
source selections including AFL and PFL signals:
• Stereo Main Output
- Central Stereo Meter indicates output level for Main Stereo and all other
sources which are listened to on the CR Monitor LS, including AFL and PFL
signals.
- Right set of 8 Meters indicate output level for SSGs 1-16 and Sends 1-24
according to the meter selector described later in this section.
• Surround Main Output
- Central Stereo Meter indicates the L and R signals from the Main Output Bus
and any other source listened to on the CR Monitor LS including external
sources, AFL and PFL signals
- Right set of 8 Meters indicate output levels for the Main Output Bus and all
other sources which are listened to on the CR Monitor LS, including external
sources, AFL and PFL signals.
Global meter functions
This section describes functions which apply to all meters in the meter bridge
except for 8, which applies just to the channels sections.
3 DISP PEAK Push-Button (Global function)
Meters continue to display peaks as single segments for a period of 1.5 seconds
after the signal has ceased.
4 PEAK HOLD Push-Button (Global function)
Meters continue to display highest peak as a single segment until CLEAR
PEAK is pressed.
5 CLEAR PEAK Push-Button (Global function)
Clears the Peak Hold memory.
6 MTRs to INPUT Push-button (Global function)
Meters the channel signal immediately post input gain control.