Sony OXF-R3 - Manual (Page 240)

6-78
Chapter 6 Technical Descriptions
Chapter 6 Technical Descriptions
6-3 Central Section Panels
1 1-8 Push-Button
Assigns Sends 1-8 to the control panel.
2 9-16 Push-Button
Assigns Sends 9-16 to the control panel.
3 17-24 Push-Button
Assigns Sends 17-24 to the control panel.
4 6 Character Display(s)
Indicates Send number or signal name defined in the ‘Send Outputs’ page
of the MASTER GUI (see section 5-2-6 in Chapter 5).
5 AFL Push-Button(s)
Sends the After Fader Listen signal to CR monitor LS. Becomes
destructive SOLO-IN-PLACE in Multi-Format Calibration mode.
6 CUT Push-Button(s)
Mutes the signal post Level control.
7 IN Push-Button (Not operational in this version)
Switches in any processing elements selected using ACCESS.
8 ACCESS Push-Button
Selects MIDI pages, one of 1-8, 9-16 or 17-24, depending on which Sends
page is selected. The MIDI GUI is selected from the SENDS GUI which
is found in the MASTER GUI.
9 TONE Push-Button
Enables Tone from the oscillator to be injected into a Send output post the
level control, in place of signals routed to that Send.
The oscillator must be switched on at the Oscillator section before the Send TONE
button will function.
0 STEREO Push-Button
Links its odd/even pair of SENDs as a stereo output so that AFL, CUT and
level functions are ganged. The stereo function is propagated through to
the channels such that the appropriate Send sections are automatically set
up for stereo operation.
Note: