Installing the paper feed unit (tray 2), Next – Kyocera FS-C1020MFP User Manual
Page 110
Top Page
>
> Installing the Paper Feed Unit (Tray 2)
Installing the Paper Feed Unit (Tray 2)
●
Touching the prongs of the power cable's plug with anything metallic constitutes a fire and electric shock
hazard.
●
The machine weighs approximately 30.0 kg (66.2 lb.). When moving the machine, use the inset grips on
both sides, and lift slowly in pairs. The machine will break or cause injury if dropped.
●
Lifting the paper feed unit carelessly or dropping may cause injury.
●
It is dangerous to handle the plug with wet hands. Doing this may result in receiving an electric shock.
●
Before moving the machine, unplug the power cord from the wall outlet. If the cord is unplugged abruptly,
it could become damaged. Damaged plugs or cords can cause an electrical or fire hazard.
●
The machine should always be lifted by two people.
●
Do not grip the tray areas when moving the machine.
Check that the package contains Paper Feed Unit.
Turn off the power, and then unplug the machine's power cord from the wall outlet.
Remove the adhesive tape from the optional paper feed unit.
Lift using the inset grips on both sides of the machine.
Contents