Registering scan destinations, For details, see, Next – Kyocera FS-C1020MFP User Manual
Page 214
Top Page
>
> Registering Scan Destinations
Registering Scan Destinations
This section describes how to register scan destinations in the Address Book. To send scanned files to an e-
mail address (Scan to E-mail), FTP server (Scan to FTP), or a shared folder on a network computer (Scan
to Folder), you must first register the destination in the Address Book using Web Browser.
●
The Address Book data could be damaged or lost unexpectedly. The manufacturer shall not be responsible for any damages
resulting from such data loss. Be sure to create backup files of the Address Book data periodically.
●
Depending on your network environment, the Scan to FTP and Scan to Folder functions may require a user name and
password to be correctly entered in the destination information. In such cases, after registering destinations, check that the
user name and password are correctly entered by sending test documents to those destinations.
The Address Book can contain up to 100 entries, including 20 Quick Dial entries.
Destinations registered as Quick Dial entries can be selected by pressing the corresponding One Touch
button.
Start the Web browsing software, and access the machine by entering its IP address.
Click [One Touch Button] or [Scan Destination].
From the [Add New Type] list, select [E-mail], [FTP] or [Folder].
Register information as necessary.
The information you must register varies depending on the destination type. For details, see the tables
below.
Enter the administrator password if required.
Click [Submit].
Close the Web browsing software.
Scan to E-mail Settings
Contents