Specifying the tray for printing faxes, Next – Kyocera FS-C1020MFP User Manual

Page 371

Advertising
background image

Top Page

>

Configuring the Machine Using Web Browser

>

Configuring the Machine Settings

> Specifying the Tray for Printing Faxes

Specifying the Tray for Printing Faxes

Click the [Fax] tab on the machine settings page to specify the tray for printing faxes.

Tray Selection

Item

Description

Tray Selection

Select the tray for printing faxes from the following: Auto, Tray 1 Only, or Tray 2, Only.
If [Auto] is selected, the machine uses tray 1 and tray 2 if they contain paper of the same size.

In this case, the machine starts to print from tray 1. If tray 1 runs out of paper, the machine

automatically switches to tray 2 to continue printing. If tray 2 runs out of paper, load paper in

tray 1.

Only A4, Letter, or Legal size paper can be used for printing faxes. Make sure to select a tray that contains paper of the valid

size.

If tray 2 is not installed, only [Tray1 Only] appears.

Top

Previous Next

Copyright © 2009

Contents

Previous Next

Settings

Advertising