Machine setting parameters, Next, 0(off) – Kyocera FS-C1020MFP User Manual
Page 326
Top Page
>
Configuring the Machine Using the Control Panel
> Machine Setting Parameters
Machine Setting Parameters
This section describes the machine setting parameters.
●
Some items might not appear, depending on the model type you are using.
Speaker Volume
Specifies the volume of the sounds produced by the machine.
Default: 1 for [Keypad Volume], and 2 for other parameters.
●
Keypad Volume
Specifies the volume of the beep that sounds when a key is pressed.
❍
0(Off)
❍
1
❍
2
❍
3
●
Ring Volume
Specifies the volume of the ring when a call is received.
❍
0(Off)
❍
1
❍
2
❍
3
●
Line Mon. Vol
Specifies the volume of the sound from the speaker during on hook mode.
❍
0(Off)
❍
1
❍
2
❍
3
●
Job End Tone Vol
Specifies the volume of the beep that sounds when a job is complete.
❍
0(Off)
❍
1
❍
2
❍
3
●
Job Error Tone Vol
Specifies the volume of the beep that sounds when a fax transmission error occurs.
❍
0(Off)
❍
1
❍
2
❍
3
●
Alarm Volume
Specifies the volume of the alarm that sounds when an operation error occurs.
❍
0(Off)
❍
1
Contents