Kyocera FS-C1020MFP - Manual (Page 328)

Locked Print file. You can also print or delete an existing Locked Print file so that the new
Locked Print file can be stored in the machine.
Default: 60 seconds
❍
0 to 300 seconds, in increments of 1 second
●
Restrict User
Specifies how many seconds a user stays authenticated after paper is output when copying
with the exposure glass. Note that authentication automatically expires immediately after
copying using the ADF, sending a fax, or scanning using the control panel.
This setting appears only when the user restriction function is enabled via Web Browser.
Default: 30 seconds
❍
5 to 60 seconds, in increments of 1 second
Auto Continue
Sets the machine to ignore an error with paper size or type and continue printing. The printing stops
temporarily when an error is detected, and restarts automatically after ten seconds.
Default: [Off]
●
On
●
Off
Toner Saver Mode
Sets the machine to print using a reduced amount of toner.
Default: [Off]
●
On
●
Off
Supplies Info
Displays information about consumables.
●
Toner
Displays the remaining amount of toner.
❍
Black Life
(New), , , , , (Needs replacing)
❍
Magenta Life
(New), , , , , (Needs replacing)
❍
Yellow Life
(New), , , , , (Needs replacing)
❍
Cyan Life
(New), , , , , (Needs replacing)
●
Waste Toner Bottle
❍
Waste Bottle Life
[Ready]
The waste toner bottle is usable.
[Near Full]
The waste toner bottle is almost full, and needs to be replaced soon.
[Full]
The waste toner bottle needs to be replaced.
●
Fuser Unit
❍
Fuser Unit Life
Displays the remaining life of the fusing unit.
(New), , , , , (Needs replacing)
Scanner Carriage