Kyocera FS-C1020MFP User Manual

Page 426

Advertising
background image

Bypass Tray Paper Empty

The bypass tray has run out of paper.

Load paper to the bypass tray. See

Loading

Paper in the Bypass Tray

.

Cannot Copy 2in1/4in1-

Copy Only Support A4/LT/LG

2-in-1 or 4-in-1 copy could not be

performed because the tray does not

contain the valid size paper, which

are A4, Letter, or Legal size.

Set the machine to print copies

using the A4, Letter, or Legal size

paper in the [Paper Select] setting.

See

Copy Settings

.

Specify the A4, Letter, or Legal size

paper for the tray selected for

printing copies in the [Paper Size]

setting. See

Machine Settings

.

Cannot Copy Insert Paper to

ADF

2-in-1, 4-in-1, 2-sided, or sort copy

could not be performed because the

originals were not placed in the ADF.

Use the ADF, even when copying a

single sheet.

If you need to use the exposure

glass, turn off [2in1], [4in1],

[Duplex Copy], or [Sort] under copy

settings, and then try again. See

Copy Settings

.

Connection Fail

The line could not be connected

correctly.

Confirm that the telephone line is

properly connected to the machine.

Disconnect the telephone line from

the machine, and connect a

standard telephone in its place.

Confirm that you can make calls

using the telephone. If you cannot

make calls this way, contact your

telephone company.

C toner Independent-supply

A non-supported print cartridge is

installed.

Contact your service representative.

Cover Open

A cover is open.

Close the cover completely.

Dial Fail

The fax could not be sent.

Confirm that the fax number you

dialed is correct.

Confirm that the destination is a fax

machine.

Confirm that the line is not busy.

You may need to insert a pause

between dial digits. Press the

[Pause/Redial] key after, for

example, the area code.

Density Sensor Require

Cleaning

The machine failed to adjust color

registration.

Clean the toner density sensor. See

Cleaning the Toner Density Sensor

.

Advertising