Kyocera FS-C1020MFP - Manual (Page 286)

Top Page > Using the Fax Function > Receiving a Fax > Selecting Reception Mode
Selecting Reception Mode
This section describes how to select the reception mode.
The reception modes are as follows:
When using the machine only as a fax machine
Select the following mode when no external telephone or telephone answering device is connected:
●
Fax Only mode (auto reception)
In this mode, the machine is used only as a fax machine and receives faxes automatically.
When using the machine with an external device
Select one of the following modes when an external telephone or telephone answering device is
connected:
●
Manual mode (manual reception)
In this mode, you must answer calls with an external telephone. If a call is a fax call, you
have to start the fax reception manually.
●
Fax Only mode (auto reception)
In this mode, the machine automatically answers all incoming calls in fax reception mode.
●
FAX/TEL mode (auto reception)
In this mode, you can answer phone calls with an external telephone and receive faxes
automatically.
●
FAX/TAD mode (auto reception)
In this mode, you can use the machine with an external telephone answering device.
Press the [User Tools] key.
Press the [ ][ ] keys to select [Fax Settings], and then press the [OK] key.
Press the [ ][ ] keys to select [RX Settings], and then press the [OK] key.
Press the [ ][ ] keys to select [RX Mode], and then press the [OK] key.
Press the [ ][ ] keys to select the desired reception mode, and then press the [OK] key.
Confirm the setting, and then press the [ ] key.
Press the [Clear/Stop] key to return to the initial screen.
Contents Previous Next Settings