Specifying a custom paper size, Next – Kyocera FS-C1020MFP User Manual
Page 144
Top Page
>
Specifying Paper Type and Paper Size
> Specifying a custom paper size
Specifying a custom paper size
This section describes how to specify a custom paper size.
●
Custom size paper cannot be loaded in tray 2.
●
When you perform printing, make sure that the paper size specified with the printer driver matches the paper size specified
with the control panel. If a paper size mismatch occurs, a message appears on the display. To ignore the error and print using
mismatched paper, press the [B&W Start] key or [Color Start] key. If the paper is too small for the print job, the printed
image will be cropped.
Press the [User Tools] key.
Press the [ ][ ] keys to select [Machine Settings], and then press the [OK] key.
Press the [ ][ ] keys to select [Paper Settings], and then press the [OK] key.
Press the [ ][ ] keys to select [Paper Size], and then press the [OK] key.
Press the [ ][ ] keys to select the desired tray, and then press the [OK] key.
Press the [ ][ ] keys to select [Custom], and then press the [OK] key.
Press the [ ][ ] keys to select [mm] or [Inch], and then press the [OK] key.
Enter the horizontal value using number keys, and then press the [OK] key.
You can press the [ ][ ] keys to change the value in 1 mm or 0.01 inch increments.
Enter the vertical value using number keys, and then press the [OK] key.
You can press the [ ][ ] keys to change the value in 1 mm or 0.01 inch increments.
Confirm the setting, and then press the [OK] key.
Press the [Clear/Stop] key to return to the initial screen.
●
You can press the [ ] key to exit to the previous level of the menu tree.
Contents