Kyocera FS-C1020MFP - Manual (Page 308)

Top Page > Configuring the Machine Using the Control Panel > Scanner Settings > Scanner Setting Parameters
Scanner Setting Parameters
This section describes the scanner setting parameters.
●
Some items might not appear, depending on the model type you are using.
Document Size
Specifies the scanning size according to the size of the original.
Default:
[LTR 8.5x11], [A4 210x297]
●
LGL 8.5x14, LTR 8.5x11, STMT 8.5x5.5, EXEC 7.25x10.5, A4 210x297, B5 182x257, A5
210x148, Custom
Multi Page in A Document
Sets the machine to create a single file containing all pages when scanning multiple pages.
Note that a scanned file can contain multiple pages only when the file format is PDF or TIFF. If the
file format is JPEG, a single-page file is created for each scanned page.
Default: [Yes]
●
Yes
●
No
Limitless Scan
Sets the machine to request next originals when scanning with the exposure glass.
Default: [Off]
●
On
●
Off
Color Compressed Ratio
Specifies the color compression ratio for JPEG files. The lower the compression ratio, the higher the
quality but greater the file size.
Default: [Medium]
●
Low
●
Medium
●
High
Resolution
Specifies the resolution for scanning the original.
Default: [300x300 dpi]
●
100x100 dpi
●
150x150 dpi
●
200x200 dpi
●
300x300 dpi
●
400x400 dpi
●
600x600 dpi
Contents Previous Next Settings