Kyocera FS-C1020MFP - Manual (Page 250)

Top Page > Using the Fax Function > Sending a Fax > Selecting Transmission Mode
Selecting Transmission Mode
This section describes how to select the transmission mode.
There are two transmission modes: Memory Transmission and Immediate Transmission.
Memory Transmission
In this mode, the machine scans several originals into memory and sends them all at once. This is
convenient when you are in a hurry and want to take the document away from the machine. In this
mode, you can send a fax to multiple destinations.
Immediate Transmission
In this mode, the machine scans the original and faxes it simultaneously, without storing it in
memory. This is convenient when you want to send an original quickly. In this mode, you can only
specify one destination.
Press the [Facsimile] key.
Press any menu key.
Press the [ ][ ] keys to select [Immediate TX], and then press the [OK] key.
Press the [ ][ ] keys to select [Off], [On], or [Next Fax Only], and then press the [OK]
key.
For Memory Transmission, select [Off].
For Immediate Transmission, select [On] or [Next Fax Only].
The new setting is displayed with an " " symbol, indicating that the setting has been changed.
Confirm the setting, and then press the [ ] key.
Press the [Clear/Stop] key to return to the initial screen.
Contents Previous Next Settings