Kyocera FS-C1020MFP - Manual (Page 432)

“Near End C Toner”
“Near End Y Toner”
●
Do not allow paper clips, staples, or other small objects to fall inside the machine.
●
Do not expose the print cartridge without its cover to direct sunlight for a long time.
●
Do not touch the print cartridge's photo conductor unit.
●
Do not touch the ID chip on the side of the print cartridge (the white area in the illustration below).
●
When removing print cartridges, be careful not to touch the Laser Scanning Unit on the underside of the upper cover (the
white area in the illustration below).
●
If cyan, magenta, or yellow toner runs out, you can print in black and white using just the black toner. Change the color mode
setting to Black and White using the machine's driver.
●
If black toner runs out, you cannot print in black and white or color until the black print cartridge is replaced.
Pull up the lever on the top cover, and then carefully raise the top cover.
Make sure that the ADF is closed.