Installing the memory unit (ddr-sdram module), Next – Kyocera FS-C1020MFP User Manual
Page 112
Advertising
Top Page
>
> Installing the Memory Unit (DDR-SDRAM Module)
Installing the Memory Unit (DDR-SDRAM Module)
●
Before installing the memory unit to the machine, turn off the power and unplug the power cable. When
turning on the machine after the installation, be sure to close the memory cover in advance.
●
Before touching the memory unit, ground yourself by touching something metal to discharge any static electricity. Static
electricity can damage the memory unit.
●
Do not subject the memory unit to physical shocks.
Turn off the power, and then unplug the power cord.
Remove the memory cover.
Loosen the screw securing the inner cover.
Be sure to install the memory unit as shown.
Contents
Advertising