Kyocera FS-C1020MFP - Manual (Page 203)

●
Landscape Column
Scaling is preset to 50%, regardless of the printout paper size.
Use this procedure to set 2-in-1/4-in-1 copy mode for the current job.
Press the [Reduce/Enlarge] key.
Press the [Reduce/Enlarge] key or [ ][ ] keys to select [2in1] or [4in1], and then press
the [OK] key.
Press the [ ][ ] keys to select the desired printout format, and then press the [OK] key.
●
If [2in1] has been selected, select [Portrait] or [Landscape].
●
If [4in1] has been selected, select [Portrait Row], [Portrait Column], [Landscape Row], or
[Landscape Column].
●
Use the following keys to cancel settings:
❍
[ ]: Cancels the changes made to settings and returns the display to the previous screen.
❍
[Clear/Stop]: Cancels the changes made to settings and returns the display to the initial screen.
●
You can change the machine's default [Reduce/Enlarge] setting to always make photocopies in 2-in-1 or 4-in-1 mode.
●
Temporary job settings are cleared in the following cases:
❍
When no input is received for the period of time specified in [Auto Clear] while the initial screen is displayed.
❍
When the [Clear/Stop] key is pressed while the initial screen is displayed.
❍
When the machine's mode is changed.
❍
When the power is turned off.
❍
When the machine's default for the same setting is changed.