Kyocera FS-C1020MFP - Manual (Page 196)

Top Page > Using the Copier Function > Basic Operation in Copier Mode
Basic Operation in Copier Mode
This section describes the basic procedure for making photocopies.
●
The original in the ADF takes precedence over the original on the exposure glass if you place originals both in the ADF and on
the exposure glass.
Press the [Copy] key.
Place the original on the exposure glass or in the ADF.
If necessary, configure advanced photocopy settings.
To make multiple copies, enter the number of copies using the number keys.
Press the [B&W Start] key or [Color Start] key.
To make black-and-white photocopies, press the [B&W Start] key.
To make color photocopies, press the [Color Start] key.
●
The maximum number of copies is 99.
●
You can select the paper size used for printing copies in the [Paper Select] setting under copy settings.
●
When making multiple copies of a multi-page document, you can select whether copies are output in collated sets, or in
page batches in the [Sort] setting under copy settings.
●
If a paper jam occurs, printing stops after the current page has been printed out. After the jammed paper is removed,
printing restarts from the jammed page automatically.
Contents Previous Next Settings