Loading paper in tray 1, Next – Kyocera FS-C1020MFP User Manual
Page 127
Top Page
>
Loading Paper in Tray 1
The following example explains loading procedure for the standard paper tray (Tray 1). The same
procedure can be used for the optional paper feed unit.
●
Make sure paper is not stacked above the limit mark inside the tray. Misfeeds might occur.
●
After loading paper in the tray, specify the paper type and size using the control panel.
●
Do not mix different types of paper in the same paper tray.
●
Do not move the side paper guides forcefully. Doing so can damage the tray.
●
Do not move the end paper guide forcefully. Doing so can damage the tray.
●
When inserting the tray, make sure it is not slanted. Inserting it at a slant can damage the machine.
Lift and pull Tray 1 carefully, and then pull it out with both hands.
Place the tray on a flat surface.
Push the metal plate down until it clicks into place to lock.
Pinch the clip on the side paper guide and slide it to match the standard size.
Contents