Kyocera FS-C1020MFP - Manual (Page 353)

●
Duplex
Sets the machine to print on both sides of paper according to the specified binding method.
Default: [Off]
❍
Off
❍
Long Edge Bind
❍
Short Edge Bind
●
Blank Page Print
Sets the machine to print blank pages.
When cover sheet printing is enabled from the printer driver, cover sheets are inserted even if
you select [No Print].
Default: [Print]
❍
Print
❍
No Print
●
B&W Page Detect
Sets the machine to print all monochrome pages in monochrome mode even if color printing is
specified.
Default: [Off]
❍
On
❍
Off
●
Print Error Page
Sets the machine to print an error page when the machine detects an error.
Default: [Off]
❍
On
❍
Off
PCL Menu
Specifies conditions when using PCL for printing.
●
Orientation
Specifies the page orientation.
Default: [Portrait]
❍
Portrait
❍
Landscape
●
Form Lines
Specifies the number of lines per page.
Default:
60, 64
❍
5 to 128, in increments of 1
●
Font Number
Specifies the ID of the default font you want to use.
Default: 0
❍
0 to 89
●
Point Size
Specifies the point size for the default font.
This setting is effective only for a variable-space font.
Default: 12.00 points
❍
4.00 to 999.75, in 0.25 increments
●
Font Pitch