Kyocera FS-C1020MFP - Manual (Page 380)

Top Page > Configuring the Machine Using Web Browser > Configuring the Network Settings > Configuring the Network Application Settings
Configuring the Network Application Settings
Click the [Network Application] tab on the network settings page to configure the network application
settings.
Network Scan Settings
Item Description
E-mail Select to enable the Scan to E-mail feature.
FTP Select to enable the Scan to FTP feature.
Folder Select to enable the Scan to Folder feature.
Max Size
Select the maximum size of scan files that can be attached to an e-mail message (1 to 5 MB, or
unlimited).
Network Print Settings
Item Description
IPP Select to enable network printing using Internet Print Protocol (via TCP port 631/80).
FTP Select to enable network printing using an embedded FTP server in the machine (via TCP port 20/21).
RAW Select to enable network raw printing.
Port #
Enter the TCP port number to use for raw printing. The valid range is 1024 to 65535, except 53550
(default is 9100).
LPR Select to enable network printing using LPR/LPD (via TCP port 515).
mDNS Setting
Contents Previous Next Settings