Kyocera FS-C1020MFP - Manual (Page 253)

can specify the length of the pause time in the [Pause Key Time] setting under fax transmission settings.
●
To use tone services on a pulse-dialing line, insert " " in a fax number. " " switches the dialing mode from pulse to
tone temporarily.
●
You can also specify a destination using the One Touch buttons, Speed Dial function, or [Pause/Redial] key. In addition,
you can specify multiple destinations and broadcast the fax you are sending.
●
When in Memory Transmission mode, you can enable the [Auto Redial] setting under fax transmission settings to set the
machine to automatically redial the destination if the line is busy or an error occurs during transmission.
●
When in Memory Transmission mode, the machine's memory may become full while scanning the originals. In this case,
the screen prompts you to cancel the transmission or to send only the pages that have been scanned successfully.
●
If paper is jammed in the ADF, the jammed page has not been scanned properly. When the machine is in Immediate
Transmission mode, resend the fax starting from the jammed page. When in Memory Transmission mode, scan the entire
originals again.
●
For details about entering characters, see Entering Characters .
●
To place the originals, see Placing Originals .
●
To configure advanced scan settings, see Specifying the Scan Settings .
●
For details about other methods of specifying destinations, see Specifying the Fax Destination .
●
For details about [Auto Redial] or [Pause Key Time], see Fax Transmission Settings .
●
For details about how to remove the paper jammed in the ADF, see Removing Scanning Jams .
Related topics
Canceling a fax
Top Previous Next
Copyright © 2009