Top previous next – Kyocera FS-C1020MFP User Manual

Page 206

Advertising
background image

display.

Within 30 seconds, place the original back side down and top to the machine rear on the

exposure glass, and then press the [B&W Start] key or [Color Start] key again.

Use the same mode (color or black-and-white) for both sides.

Use the following keys to cancel settings:

[ ]: Cancels the changes made to settings and returns the display to the previous screen.

[Clear/Stop]: Cancels the changes made to settings and returns the display to the initial screen.

If you do not copy the back side within 30 seconds after copying the front side, the job will be canceled.

Regardless of the machine's reduction or enlargement ratio setting, an ID card copy will always be made at 100%.

You can change the machine's default [Reduce/Enlarge] setting to always make photocopies in ID card copy mode.

Setting this function for the current job temporarily disables the [Duplex Copy] setting automatically. However, after the

temporary job setting is cleared, the duplex copy function will be enabled again automatically.

Temporary job settings are cleared in the following cases:

When no input is received for the period of time specified in [Auto Clear] while the initial screen is displayed.

When the [Clear/Stop] key is pressed while the initial screen is displayed.

When the machine's mode is changed.

When the power is turned off.

For details about [Reduce/Enlarge], see

Copy Settings

.

For details about [Auto Clear], see

Administrator Settings

.

Top

Previous Next

Copyright © 2009

Advertising