Kyocera FS-C1020MFP - Manual (Page 266)

Top Page > Using the Fax Function > Sending a Fax > Specifying the Scan Settings > Specifying the resolution
Specifying the resolution
This section describes how to specify the scan resolution for the current job.
There are three resolution settings:
Standard
Select this when the original is a printed or typewritten document with normal-sized characters.
Fine
Select this when the original is a document with small print.
Photo
Select this when the original contains images such as photographs or shaded drawings.
Press the [Image Quality] key.
Press the [Image Quality] key or [ ][ ] keys to select the desired resolution setting,
and then press the [OK] key.
●
Press the [ ] key or [Clear/Stop] key to discard the current change and return to the initial screen.
●
You can change the machine's default [Resolution] setting to always scan with a specific resolution level.
●
Temporary job settings are cleared in the following cases:
❍
When no input is received for the period of time specified in [Auto Clear] while the initial screen is displayed.
❍
When the [Clear/Stop] key is pressed while the initial screen is displayed.
❍
When the machine's mode is changed.
❍
When the power is turned off.
❍
When the machine's default for the same setting is changed.
●
For details about [Resolution], see Fax Transmission Settings .
●
For details about [Auto Clear], see Administrator Settings .
Contents Previous Next Settings