Specifying the size of paper for printing copies, Next – Kyocera FS-C1020MFP User Manual
Page 370
Top Page
>
Configuring the Machine Using Web Browser
Configuring the Machine Settings
> Specifying the Size of Paper for
Printing Copies
Specifying the Size of Paper for Printing Copies
Click the [Copy] tab on the machine settings page to specify the size of paper for printing copies.
Paper Selection
Item
Description
Paper Selection
Select the paper size used for printing copies from the following: Tray 1, Tray 2, Bypass Tray,
A4, or LTR.
When a tray is selected, the machine prints from that tray only. When a paper size is selected,
the machine prints from the trays that contain the paper of the specified size, except the bypass
tray. If tray 1 and tray 2 both contain the paper of the specified size, the machine starts to print
from tray 1. If tray 1 runs out of paper, the machine automatically switches to tray 2 to
continue printing. If tray 2 runs out of paper, load paper in tray 1.
●
If tray 2 is not installed, only [Tray1] and [Bypass Tray] appear.
Copyright © 2009
Contents