Kyocera FS-C1020MFP - Manual (Page 235)

Top Page > Using the Fax Function > The Screen in Fax Mode
The Screen in Fax Mode
This section provides information about the screen in fax mode.
By default, the display shows the copier screen when the machine is turned on.
If the copy or scanner screen is shown on the display, press the [Facsimile] key on the control panel to
switch to the fax screen.
Screen in standby mode
Ready 31-07
Standard 23:30
●
First line:
Shows the current status of the machine and current month and date.
●
Second line:
Shows the current resolution setting and current time.
●
The machine's default mode at power on can be specified in the [Default Mode] setting under [Admin Settings].
●
The display format for time and date can be specified in [Date/Time Setup] under [Admin Settings].
●
For details about [Default Mode] or [Date/Time Setup], see Administrator Settings .
Top Previous Next
Copyright © 2009
Contents Previous Next Settings