Configuring the power saver mode settings, Next – Kyocera FS-C1020MFP User Manual
Page 397
Top Page
>
Configuring the Machine Using Web Browser
Configuring the Administrator Settings
> Configuring the Power Saver
Mode Settings
Configuring the Power Saver Mode Settings
Click the [Power Saver] tab on the administrator settings page to set the machine to enter Energy Saver
mode, Energy Saver mode 1 or Energy Saver mode 2, to reduce power consumption.
Power Saver
Item
Description
EnergySaverMode1
Select [ON] to set the machine to enter Energy Saver mode 1 if the machine has been idle
for about 30 seconds.
It takes less time to recover from Energy Saver mode 1 than from power-off state or Energy
Saver mode 2, but power consumption is higher in Energy Saver mode 1 than in Energy
Saver mode 2.
EnergySaverMode2
Select [ON] to set the machine to enter Energy Saver mode 2 after the period of time
specified for [Waiting Time] is passed (1 to 240 minutes).
The machine consumes less power in Energy Saver mode 2 than in Energy Saver mode 1,
but it takes longer to recover from Energy Saver mode 2 than from Energy Saver mode 1.
●
The machine recovers from Energy Saver mode when it receives a print job, prints a received fax, or when the [Copy], [Color
Start], or [B&W Start] key is pressed.
Copyright © 2009
Contents