Kyocera FS-C1020MFP - Manual (Page 195)

Top Page > Using the Copier Function > The Screen in Copier Mode
The Screen in Copier Mode
This section provides information about the screen when the machine is in copier mode.
By default, the display shows the copier screen when the machine is turned on. If the scanner or fax
screen is shown on the display, press the [Copy] key on the control panel to switch to the copier screen.
Screen in standby mode
Ready A4
100% Mixed 01
●
First line:
Shows the current status of the machine and current paper size.
●
Second line:
Shows the current reduction or enlargement ratio, copy quality, and number of copies.
●
The start-up mode can be specified in the [Default Mode] setting under [Admin Settings].
●
For details about [Default Mode], see Administrator Settings .
Top Previous Next
Copyright © 2009
Contents Previous Next Settings