Kyocera FS-C1020MFP User Manual
Page 88
Storing a document to be faxed into the
machine's memory before transmission
●
Fax memory transmission
●
Fax memory reception
●
Immediate fax printing
●
Printing a fax received in the machine's memory
●
*1
Immediate fax transmission (scanning an
original and sending it simultaneously)
●
Printing a fax received in the machine's memory
●
*1
Printing a fax received in the machine's
memory
●
Fax memory reception
●
Fax memory transmission
●
Fax immediate transmission
●
Scan
*3
●
Storing a document to be faxed into the machine's memory
before transmission
Immediate fax printing (receiving a fax and
printing it simultaneously)
●
Scan
*3
●
Storing a document to be faxed into the machine's memory
before transmission
*1
Printing starts after scanning is finished if [Gradation] is set to [Standard] or [Fine] (PCL printer driver), or [Print
Quality] in [Printer Features] is set to [High Quality] or [Best Quality] (PostScript 3 printer driver).
*2
Scanning is not possible if [Gradation] is set to [Standard] or [Fine] (PCL printer driver), or [Print Quality] in [Printer
Features] is set to [High Quality] or [Best Quality] (PostScript 3 printer driver).
*3
Fax printing may take longer than normal if you scan using the control panel at the same time, especially when
scanning multiple pages using the exposure glass.
●
If you try to use a function that cannot be performed simultaneously, you will hear a beep sound from the machine or see a
failure message pop up on your computer screen. In this case, try again after the current job is finished.
Copyright © 2009