Next – Kyocera FS-C1020MFP User Manual
Page 239
Top Page
>
> Registering Fax Destinations Using the Control Panel
Registering Fax Destinations Using the Control Panel
This section describes how to register destinations using the control panel.
Press the [User Tools] key.
Press the [ ][ ] keys to select [Fax Directory], and then press the [OK] key.
If you are requested to enter a password, enter the password using the number keys,
and then press the [OK] key.
Press the [ ][ ] keys to select [Quick Dial Entry] or [Speed Dial Entry], and then press
the [OK] key.
Press the [ ][ ] keys to select the desired Quick Dial entry number (01 to 20) or Speed
Dial entry number (01 to 50), and then press the [OK] key.
Press the [ ][ ] keys to select [Fax # Entry], and then press the [OK] key.
Enter the fax number (up to 40 characters), and then press the [OK] key.
Press the [ ][ ] keys to select [Fax Name Entry], and then press the [OK] key.
Enter the name (up to 20 characters), and then press the [OK] key.
Confirm the setting, and then press the [OK] key.
Press the [Clear/Stop] key to return to the initial screen.
●
You can press the [ ] key to exit to the previous level of the menu tree.
●
A fax number can contain 0 to 9, pause, "
", "
", and space.
●
If necessary, insert a pause in the fax number. The machine pauses briefly before it dials the digits following the pause.
You can specify the length of the pause time in the [Pause Key Time] setting under fax transmission settings.
●
To use tone services on a pulse-dialing line, insert “
” in the fax number. “
” switches the dialing mode from pulse to
tone temporarily.
●
A password for accessing the [Fax Directory] menu can be specified in [Admin Menu Lock].
Contents