Kyocera FS-C1020MFP - Manual (Page 446)

Push the metal plate down until it clicks into place to lock it.
Reload the removed paper into the tray, and then push the tray carefully into the
machine until it clicks into place.
Insert the plug of the power cord into the wall socket securely. Connect all the interface
cables that were removed.
Turn on the power.
●
If jams or multi-sheet feeds occur after cleaning the friction pad, contact your service representative.
●
If the optional tray 2 is installed, clean its friction pad and paper feed roller in the same way as you did for tray 1.
Top Previous Next
Copyright © 2009