Kyocera FS-C1020MFP - Manual (Page 122)

Top Page > Getting Started > Paper and Other Media > Unsupported Types of Paper
Unsupported Types of Paper
Avoid using the following paper as they are not supported by this machine.
●
Paper meant for an ink-jet printer
●
Bent, folded, or creased paper
●
Curled or twisted paper
●
Torn paper
●
Wrinkled paper
●
Damp paper
●
Paper that is dry enough to emit static electricity
●
Paper that has already been printed onto, except a preprinted letterhead.
Malfunctions are especially likely when using paper printed on by other than a laser printer (e.g.
monochrome and color copiers, ink-jet printers, etc.)
●
Special paper, such as thermal paper, aluminum foil, carbon paper and conductive paper
●
Paper that is heavier or lighter than the specified limitations
●
Paper with windows, holes, perforations, cutouts, or embossing
●
Adhesive label paper on which the adhesive underlayer or base paper is exposed
●
Paper with clips or staples
●
Do not use ink-jet printer paper because it may stick to the fusing unit and cause a paper jam.
●
Do not load OHP transparencies. Load translucent media only.
●
Do not use paper that has already been printed onto by other printers.
●
Even supported types of paper may cause paper jams or malfunctions if the paper is not in good condition.
Top Previous Next
Copyright © 2009
Contents Previous Next Settings