Kyocera FS-C1020MFP - Manual (Page 318)

The machine uses tray 1 and tray 2 if they contain paper of the same size. In this case,
the machine starts to print from tray 1. If tray 1 runs out of paper, the machine
automatically switches to tray 2 to continue printing. If tray 2 runs out of paper, load
paper in tray 1.
❍
Tray1 Only
❍
Tray2 Only
Delete Document
Deletes unsent fax jobs remaining in the machine's memory.
This function is only performed when selected.
●
Memory Job Clear
To delete a fax job, select the desired job, and then select [Clear]. Selecting [Not Clear] exits
to the previous level of the menu tree without deleting the fax job.
●
All Clear
To delete the fax jobs, select [Clear]. Selecting [Not Clear] exits to the previous level of the
menu tree without deleting the fax job.
Comm Settings
●
ECM TX
Sets the machine to automatically resend parts of the data that are lost during transmission.
Default: [On]
❍
Off
❍
On
●
ECM RX
Sets the machine to automatically receive parts of the data that are lost during reception.
Default: [On]
❍
Off
❍
On
●
Dial Tone Detect
Sets the machine to detect a dial tone before the machine begins to dial the destination
automatically.
Default: [Detection]
❍
Detection
❍
Not Detection
●
TX Speed
Specifies the transmission speed for the fax modem.
Default: [33.6 Kbps]
❍
33.6 Kbps
❍
14.4 Kbps
❍
9.6 Kbps
❍
7.2 Kbps
❍
4.8 Kbps
❍
2.4 Kbps
●
RX Speed
Specifies the reception speed for the fax modem.
Default: [33.6 Kbps]
❍
33.6 Kbps
❍
14.4 Kbps
❍
9.6 Kbps
❍
7.2 Kbps
❍
4.8 Kbps