Turning the power on, Next – Kyocera FS-C1020MFP User Manual
Page 80
Top Page
>
Turning the Power on
This section describes how to turn on the machine.
●
Plug and unplug the power cable with dry hands, or an electric shock could occur.
●
Make sure that the power cord is plugged securely into the wall outlet before turning the power on.
●
Make sure that the power is off when plugging or unplugging the power cord.
●
Do not turn off the power switch until initializing is completed. Doing so results in malfunction.
Plug in the power cord.
Turn the power switch to ” On”.
The [Copy] key on the control panel lights up.
●
Depending on the [Default Mode] setting under [Admin Settings], the [Facsimile] key may light up instead of the [Copy]
key.
●
The machine may make a noise while initializing. This noise does not indicate a malfunction.
●
To turn off the power, turn the power switch to “
Off”.
Contents