Installing the batch portable application on the, Handheld device – IntelliTrack Check In/Out User Manual
Page 308
I
NTELLI
T
RACK
C
HECK
I
N
-O
UT
V
8.1
User Manual
278
Support Matrix from the menu bar. The Hardware Support Matrix
page appears.
Or, open the Batch Portable Utility via your DMS application and click
the Hardware Support Matrix link via the Installation tab to go
directly to the Hardware Support Matrix page (requires Internet con-
nection at your PC.) (The Batch Portable Utility is opened via the rib-
bon: select Portable > Synchronize CE Device > Synchronize CE
Device from the ribbon.)
2.
In the Product field, click the drop-down arrow and select your Intelli-
Track Product from the drop-down list that appears.
3.
In the Version field, click the drop-down arrow and select your Intelli-
Track Product Version from the list that appears.
4.
In the Make field, click the drop-down arrow and select your device
manufacturer from the list that appears.
5.
A list of supported devices appears. Look for your device and operating
system. If you are able to locate your device and your device operating
system, click the Download button next to your device manufacturer/
operating system listing in order to download your mobile device
installer to your computer.
If you cannot locate your specific device, select Generic in the Make
field and locate the operating system of your device. Click the Down-
load button next to your device operating system listing in order to
download the generic device installer for this device operating system
to your computer.
6.
A message appears asking you if you want to run or save the file. Click
the option to save the device installation setup file to your computer.
7.
Follow your browser prompts: browse to the folder location to which
you want to save this file and then click the Save button. Remember
this location. Refer to the next section,
“Installing the Batch Portable
Application on the Handheld Device” on page 278
for detailed step-by-
step device installation instructions.
Installing the
Batch
Portable
Application
on the
Handheld
Device
You will install the application to the device from the downloaded device
installer file. Locate this file before continuing with the installation steps.
Important: In order to install the application to the device, the device
must be connected to your PC/computer.
1.
Open the mobile device installer file (retrieved from the Hardware Sup-
port Matrix, see
“Retrieving your Device Installer from the Hardware
2283.book Page 278 Thursday, July 7, 2011 2:29 PM