IntelliTrack Check In/Out - Manual (Page 35)

Chapter 1
Introduction
5
Portable Bar Code Reader Support
Your DMS application contains RF portable device support and CE Batch
portable device support; please refer to
“DMS RF Support” on page 5 and
“DMS CE Batch Support” on page 5 for more information.
DMS RF
Support IntelliTrack DMS contains the DMS RF Server application, which enables
you to use RF Portable Devices for remote data collection. When installed,
the DMS RF Server is available from your computer’s Start menu by
selecting Start > All Programs > IntelliTrack > DMS > Check In-Out >
RF Server. The DMS RF information is found in the DMS RF help. It is
available from the DMS RF program menu: Start > All Programs > Intel-
liTrack > DMS > Check In-Out > RF Server. (The DMS RF Manual is
in Adobe PDF format; you must have Adobe Reader installed on your
computer to open a PDF file. Adobe Reader is available for free download
at the Adobe website,
www.adobe.com .)
DMS CE Batch
Support IntelliTrack DMS contains the DMS Batch Synchronization Utility and
DMS Batch application. Use the DMS Batch application to collect data
remotely with a batch portable device.
The DMS Batch Synchronization Utility is reached from the DMS applica-
tion ribbon by selecting Portable > Synchronize CE Device > Synchro-
nize CE Device. It is used to manage your portable data collection settings
for sending workstation data to the portable and uploading collected data
to the workstation.
Please refer to the following areas for DMS Batch application setup and
usage instructions:
• “DMS CE Batch Setup” on page 7
• “Installing DMS Batch” on page 275
• “Batch Utility Preferences” on page 283
• “Data Upload and Download” on page 311
• “CE Batch Inventory” on page 341
• “CE Batch Check In-Out” on page 349
• “CE Batch Issues and Receipts” on page 369
• “CE Data Searching” on page 375
2283.book Page 5 Thursday, July 7, 2011 2:29 PM