IntelliTrack Check In/Out User Manual
Page 369
Chapter 17
DMS Batch Application Setup
339
•
The batch portable application must be licensed and activated in order
to fully transfer data to the workstation application. (The demo mode
restricts the amount of items that are uploaded to 10.)
•
To transfer collected data to the Batch Synchronization Utility, tap
Sync > Send Data. A Status screen appears, showing you the status of
the data transfer process. When the upload is completed successfully,
the status bar will display “Successful Upload,” and you are returned
to the Main screen.
•
To receive data from the workstation application database, tap Sync >
Recv Data. A Status screen appears, showing you the status of the data
transfer process. When the download is completed successfully, the sta-
tus bar will display “Successful Download,” and you are returned to
the Main screen.
2283.book Page 339 Thursday, July 7, 2011 2:29 PM