Entering values for manual sensors, Figure 56, Entering values for manual sensor – Vaisala Hydromet Data Collection Platform User Manual
Page 107
Chapter 3 _____________________________________________ Configuring Modules and Sensors
VAISALA______________________________________________________________________ 105
Entering Values for Manual Sensors
With AWS Client, you can enter values for each manual sensor
included in your QML logger setup.
To enter values for manual sensors, proceed as follows:
1.
On the Settings menu, select Manual Sensors. The list of
configured manual sensors is displayed (see
).
2.
Select the sensor for which you want to enter values from the list.
3.
Select Edit. The information on the sensor is displayed (see
).
0802-149
Figure 56
Entering Values for Manual Sensor
4.
Enter the value for the manual sensor in the Value field.
NOTE
The values you enter for the manual sensors must match the manual
sensor value type: Integer, Float, or Text. The Save button is disabled
in the Manual Sensor window if the entered value is not of the correct
type.