Vaisala Hydromet Data Collection Platform - Manual (Page 225)

Chapter 5 __________________________________________ Configuring TCP/IP-Based Telemetry
VAISALA______________________________________________________________________ 223
0905-085 Figure 99 Updating Parameter Set hosts with AWS Client
Backup Servers
Parameter set hosts also provides backup definitions for application
level IP protocol clients implemented in the logger.
To define a backup for a host in Lizard, proceed as follows:
1. In the Setup menu, open Parameter Sets.
2. Select the protocol under the server for which the backup is added.
3. Add the following parameters using the Add button:
Table 29 Parameters for Backup Host
Parameter Name Data Type Use
backuphostNo 1
1. No = Running number. 1 ... 5 indicate the backup sequence number. There
may be up to five backups defined.
Text Name or IP address of
the backup server.
backupportNo Number (int) Port for protocol in the
backup server.
backupifNo Text Interface to use for
accessing the backup
server.