Vaisala Hydromet Data Collection Platform - Manual (Page 147)

Chapter 4 ________________________________________________ Configuring Telemetry Options
VAISALA______________________________________________________________________ 145
Common Configurations
Report Name
The Report name parameter indicates which report you are configuring
for the modem transfer. Because it is automatically generated by Lizard,
you cannot modify it.
Poll Command
The Poll command parameter allows reports to be retrieved on demand
with a user-definable command. When the poll request is received, the
latest report is sent.
The same report can be configured for automatic sending and polling.
Destination
The Destination parameter specifies the destination to which the report
is to be sent automatically. Depending on the setup the value can be one
of the following:
- Telephone number
- E-mail address
- FTP server name
- Name of the Station setting parameter, which can contain one of
the above.
- Empty, when the report is sent only when polled by the remote
system.
NOTE The poll string sent by the remote system must always be terminated
with carriage return (<CR>, ASCII character 13). You do not need to
configure it to the Poll command parameter, as it is automatically
expected.
NOTE To enable polling, you must select the Answer incoming calls option
from the Options dialog.