Vaisala Hydromet Data Collection Platform - Manual (Page 298)

User's Guide ______________________________________________________________________
296 _________________________________________________________________ M210933EN-C
Response to the command shows:
- IP address of the destination
- Roundtrip time taken to reach the destination
- TTL, remaining time to live (= maximum number of hops)
An example of ping command output is presented below:
/ > ping www.vaisala.com
Pinging 62.61.78.68
Reply from 62.61.78.68: time=168ms TTL=241
Command net
The net command has multiple command options for showing various
network statistics. The command syntax is:
net <warnings | statistics [clear]>
Parameters for the net command are described in Table 62 on page 296 .
NOTE The ping command requires an open network interface to work. Use
the netif command to open the appropriate interface.
Table 62 Parameters for Command net
Parameter Use
warnings Displays warning level events occurred in
communication
statistics Displays statistical information about protocols
and active network interfaces
clear Clears network warnings or statistics
NOTE All information is shown as the number of packets transmitted, except
for the sent and received data counts per network interface, which are
in bytes. Interface related data is available only for currently open
interfaces, and it is cleared when the interface is closed.