Vaisala Hydromet Data Collection Platform - Manual (Page 221)

Chapter 5 __________________________________________ Configuring TCP/IP-Based Telemetry
VAISALA______________________________________________________________________ 219
Parameter Set hosts
Managing hosts
Parameter set hosts groups general information needed for accessing
remote servers into single location in the logger. The information
contained in parameter set hosts includes:
- User credentials
- Proxy settings
- Backup servers and interfaces
Parameter set is managed using Lizard Setup Software for creating the
parameters and providing default settings and AWS Client for making
station-specific adjustments.
Storage paths for parameters in the set are defined as:
<hostname>:<protocol>:<parametername> <value>
or
<hostname>:<protocol>:<interface><parametername> <value>
To create and update the default settings for hosts, in Lizard, open the
Setup menu and choose Parameter Sets. The dialog shown in
Figure
95 on page 220 opens.
NOTE Users can connect to the QML logger using any interface configured
to accept incoming connections. The users need to supply the
credentials configured in the pppclients parameter set. It is not
necessary to configure the incoming credentials separately for each
interface.
NOTE Storage does not provide encryption for the stored user credentials.
Externally secured remote access and possibly logger userlevels are
recommended to protect the information from unauthorized access.