Gprs modem configuration, Transmission mode, Figure 197 gprs transmission configuration options – Vaisala Hydromet Data Collection Platform User Manual
Page 369
Appendix A _____________________________________ Configuration Information for Legacy Items
VAISALA______________________________________________________________________ 367
GPRS Modem Configuration
In addition to data calls and SMS messages, the GPRS modem can be
used to transfer data over the Internet.
The device GPRS-modem with iChip is added to the setup and
connected to a serial port in the Devices view.
0312-077
Figure 197
GPRS Transmission Configuration Options
Transmission Mode
The Transmission mode parameter allows selection between five
modes:
1.
Data call: The report is automatically sent to the destination by
making a call.
2.
SMS message: The report is sent using SMS message.
3.
E-mail: The report is sent to an e-mail address.
4.
FTP: The report is sent as a file to the FTP server using the file
transfer protocol.
5.
Polled only: The report is only sent when polled by the remote
system using a data call or SMS message.
For all of the above listed modes, polling using data call or SMS is
possible. You simply need to define the Poll command and enable the
Answer incoming calls option.