Vaisala Hydromet Data Collection Platform - Manual (Page 224)

User's Guide ______________________________________________________________________
222 _________________________________________________________________ M210933EN-C
4. If proxy configuration is required (http only), open interface(s)
under the protocol. Enter proxy name/address and its TCP port. If
default proxy configuration for interface is applicable, there is no
need to define the proxy here, and it is recommended that you use
the default settings instead; see
Figure 98 on page 222 .
0906-073 Figure 98 Configuring Default HTTP Proxy for Interface
Default settings are available only for defining proxy settings for
network interfaces.
All station-specific configuration regarding settings in parameter set
hosts is managed using AWS Client.
To access parameters in hosts using AWS Client, select Settings -
Parameters - Static and open the hosts set. Refer to AWS Client
documentation for instructions on how to update the values.