Figure 32 – Vaisala Hydromet Data Collection Platform User Manual
Page 77
Chapter 3 _____________________________________________ Configuring Modules and Sensors
VAISALA_______________________________________________________________________ 75
To configure the humidity and temperature transmitter, proceed as
follows:
1.
Configure the serial transmission hardware in the Optional
hardware view as shown in
In this example, MOD1/1 on RS-232 module DSU232 is selected
for use with the HMT transmitter.
It is recommended that you keep the default settings in the Line
parameters frame.
0711-139
Figure 32
Optional Hardware View: Configuring Serial
Transmission Hardware for Humidity and
Temperature Transmitter
2.
Proceed to the Equipment view; see
.
3.
Scroll down the Available list for HMT330.
4.
Click the Add button to select HMT330.
5.
Double-click the Connector list for HMT330 in the I/O
Connections frame in order to select the COM port.