Vaisala Hydromet Data Collection Platform - Manual (Page 212)

User's Guide ______________________________________________________________________
210 _________________________________________________________________ M210933EN-C
For example, if your report contains the @ character, its character value
in the GSM character set is 0 instead of the 64 in ASCII. Note also that
the GSM character set does not include certain control characters, such
as <SOH> (ASCII character number 1) or <STX> (ASCII 2) often used
in ASCII-based reports.
You can enter extended characters using the GSM character set values
by entering the characters with the format \xHH, where HH is the GSM
character number in hexadecimal. This format can be used in the
Communication interfaces view for configuring parameters for
interfaces using a GSM-based communication device and the Reports
view for using extended characters in reports.
PSTN-IP Modem
A modem for public switched telephone network can be used to provide
an IP connection carrier for the QML logger. This modem control has
been tested with Vaisala PSTN modem DXM421.
To include this component in your setup, add the device PSTN-IP and
configure it as shown in
Figure 91 on page 210 .
0710-055 Figure 91 PSTN-IP Modem Configuration
There are no station-specific parameters associated with the PSTN
modem.