Vaisala Hydromet Data Collection Platform - Manual (Page 201)

Chapter 4 ________________________________________________ Configuring Telemetry Options
VAISALA______________________________________________________________________ 199
Remote Maintenance Commands
The remote maintenance commands provide parallel functionality to
the service interface. The commands included are a subset of the service
interface commands, and responses are more suitable to the non-
interactive use.
The processing of the remote maintenance commands is enabled for the
satellite interfaces by selecting Extparser as the Command Parser
parameter. In addition, with Autotrac and Orbcomm, the Process
inbound messages option needs to be selected.
If no data is expected in return from the QML logger, the string
OK
is
returned after a successful command. A failed commands return the
string
Fail:
followed by a more detailed explanation.
The available remote maintenance commands are listed in Table 25 on
page 199 .
Multiple commands can be sent in a single message separated by
commas, for example:
spset par1 55.2, spset par2 66, spset par3 abacab
NOTE Remote command interface operates only with satellite transceivers
having bi-directional communications capability, such as Orbcomm,
Inmarsat C, and Autotrac.
NOTE The commands themselves are case insensitive, but for parameters, the
upper/lowercase selection is in effect.
Table 25 Remote Maintenance Commands
Command Use Parameters Output
spset <param> [value]
1 2 Setting or reading
the static
parameters Parameter name
Parameter value When sent without
[value], command returns
the current setting for
parameter. String
'<param> not set' is
returned if no value is
available.
spclear <param> Clearing of the
static parameters Parameter name or
ALL for clearing all
parameters n/a